CRYSTAL QUEST ® utilizes the latest technologies in the water industry, coupled with 29 years of manufacturing expertise to provide you with the most effective, healthy and great-tasting water at the most affordable price. Our products are attractive and easy to install and use. Removes more than 500 contaminants from water.
Water travels through a multi-stage filtration process.
| In stage 1, water passes through a one-micron filtration pad (1 micron equals 1/25,000th of an inch and a human hair is about 100 microns in diameter), which removes suspended particles, such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter. |
|
In stages 2 and 3, the water passes through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc KDF-55D ®, and KDF-85D ® . KDF is a major advancement in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (redox) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
Tests on KDF/GAC cartridge have shown 99+% chlorine removal past 20,000 gallons of water. In comparison, carbon cartridges of comparable volumes drop below 90% effectiveness after only 4,000 gallons.
Iron and hydrogen sulfide are oxidized into insoluable matter and attach to the surface of the media. Heavy metals such as lead, mercury, copper, nickel, chromium, cadmium, aluminum, and other dissolved metals are removed from the water by the electrochemical process. They are attracted to the surface of the media, much like a magnet. The media inhibits bacterial growth throughout the entire unit In fact, it has been shown to be reduced up to 90%, eliminating the need for silver, which is commonly used in carbon-only filters (silver is considered a pesticide by the EPA and, as such, must be registered with them).
Is copper or zinc added to the water in any significant amount? On 2.3 ppm chlorinated water, <0.05 mg/l copper and only 0.46 mg/l zinc were measured. The EPA aesthetic levels are 1.0 mg/l for are essential minerals for good health - the FDA recommends a daily intake of 15 mg of zinc and 2 mg of copper.
In stage 4, water passes through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzine) pesticides, herbicides, insecticides, volatile organic compounds (VOCs), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water, bad taste, and odors from your drinking water.
Carbon is extremely porous and provides a large surface area for contaminants to collect. Carbon-only filters must also use their capacity for chlorine removal, resulting in a shortened life. They also may use a bituminous coal carbon, which is good at removing chlorine, but not as effective at removing chemicals. We use a high-grade coconut shell carbon that is most effective at removing chemicals. Coconut shell carbon provides a significantly higher volume of micropores than either coal-, wood or lignite-based carbon. As a result, it is more effective than other carbon types in removing trihalomethanes (THMs) and other chemicals from municipally supplied water. Since our redox media removes the chlorine before it reaches the carbon, the carbon capacity is not wasted on chlorine and is free to concentrate more effectively on organic contaminants.
In stage 5, water flows through another one-micron filtration pad for further reduction of undesirable particles. The end result is total elimination or great reduction of a wide variety of contaminants.
|
