Collection: Well Filters

PRIVATE WELL SOLUTIONS - WELL FILTERS

  • High Sediment Levels

     

  • Iron - Dissolved and Undissolved

     

  • Hydrogen Sulfide - "Rotten Egg" Odor

     

  • Bad Taste and Odor

     

  • Acidic Water

     

 All of our private well filters feature the OSMONICS/AUTOTROL PERFORMA 263/740 LOGIX control valve, with a STRUCTURAL POLYGLASS mineral tank. They carry a full 5 year warranty. Additional information on the valve can be found below. NOTE: To insure you are getting the proper equipment for your particular problem, we do not offer online ordering - we prefer to talk to you live. Call us at 1-866-698-4359, 9:30 am to 5:30 pm EST Monday thru Thursday to order, or for any questions, you can also email us with your questions.

 

AUTOTROL PERFORMA 263/740 LOGIX 3 CYCLE FILTER FEATURES:

 ·          Solid state electronics

 ·          Fully automatic backwash/rinse/purge cycles

 ·          Home owner friendly modular design

 ·          Fewer moving parts than any other valve

 ·          Flapper valve disc design - eliminates friction

 ·         No moving parts in water - no iron fouling

 ·          By-pass valve included

 ·          5 year warranty on valve

 ·          Tank is polyethylene lined, with fiberglass wrap - 5 year warranty

 ·          Standard inlet/outlet - 3/4" copper tail pieces (PVC available)

Click Here For Filter Assembly Instructions.

 SEDIMENT REMOVAL FILTER - FILTER-AG - Filter-Ag is a material that is used to efficiently remove sediment and suspended matter down to 20 to 40 micron range. Backwashing cleans the media.  $599.00, with FREE shipping! (contiguous states).

SEDIMENT REMOVAL FILTER -CHEMSORB - Chemsorb filter granules are made from a natural zeolite mineral. It efficiently removes sediment and suspended matter down to 5 microns. Backwashing cleans the media.  $699.00 with FREE shipping! (contiguous states).

"RED WATER" IRON FILTER This filter combines Birm and Filter-Ag to remove undissolved (ferric) iron and other suspended matter down to 20 to 40 micron range. Backwashing cleans the media. If using a water softener, place this filter ahead of it to protect it from fouling (softeners remove only ferrous (clear water iron). Backwashing cleans the media. It can remove ferrous iron if dissolved oxygen content is at least 15% of iron content.  $699.00, with FREE shipping! (contiguous states).

IRON AND HYDROGEN SULFIDE FILTER - KDF-85 - KDF-85, a media manufactured by KDF Fluid Treatment, Inc., is a special copper/zinc alloy that effectively removes iron (ferrous and ferric) and hydrogen sulfide by oxidation and electrolysis. Iron causes reddish stains on fixtures. Hydrogen sulfide gives off "rotten egg" odor. Backwashing cleans the media. Iron limit - 5 PPM (higher with air injection). Hydrogen sulfide limit - 5 PPM. Must have a TDS (total dissolved solids) of over 150 ppm, and a pH between 6.5 and 8.5. Must also have at least 50 psi and 10 gallons per minute flow available for proper backwash. Click HERE to visit the KDF Fluid Treatment company's web site. $899.00, with FREE shipping! (contiguous states).

IRON AND HYDROGEN SULFIDE FILTER - MANGANESE GREENSAND - Manganese Greensand filters remove ferrous and ferric iron, manganese and hydrogen sulfide from water through oxidation and filtration. Backwashing and regeneration with potassium permanganate solution restores the media bed. It can remove up to 15 ppm of iron, and 5 ppm hydrogen sulfide. It can operate in a pH range of 6.2 to 8.8, and does not have a TDS requirement. Must also have at least 50 psi and 10 gallons per minute flow available for proper backwash. The solution tank is 10" in diameter by 13" tall.  $869.00, with FREE shipping! (contiguous states). Includes about a one year supply of potassium permanganate.

IRON, MANGANESE AND HYDROGEN SULFIDE FILTER - PYROLOX - Pyrolox is a mineral form of manganese oxide that removes iron, manganese and hydrogen sulfide by oxidation/reduction. No chemical regeneration is needed - only regular backwashing. Must also have at least 50 psi and 10 gallons per minute flow available for proper backwash.  $799.00 with FREE shipping! (contiguous states).

TASTE AND ODOR REMOVAL FILTER - ACTIVATED - Activated carbon is widely used to efficiently remove bad tastes and odor from well water (see above for "rotten egg" odors). It can also be used to remove chlorine from chlorine-feed systems. Backwashing cleans and re-stratifies the media.  $589.00, with FREE shipping! (contiguous states).

ACID NEUTRALIZING FILTER - CALCITE Acidic water can leach copper from pipes and cause greenish-blue stains on fixtures. It can cause many other corrosion problems, as well. When acid pH water (below 7.0) is passed through the filter, calcium carbonate (Calcite) is slowly dissolved into the water, increasing the pH to a neutral level. Backwashing cleans the bed and prevents compaction. Includes a port on the tank to inspect and add media. $699.00, with FREE shipping! (contiguous states). pH levels less than 6 require the addition of Corosex (magnesium oxide) with the calcium carbonate. It sells for $749.00 with FREE shipping! (contiguous states).

Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.
0 products

Sorry, there are no products in this collection