image_177
Four Stage Residential Reverse Osmosis Water System 50 GPD
Four Stage Residential Reverse Osmosis Water System 50 GPD
  • Load image into Gallery viewer, image_177
  • Load image into Gallery viewer, Four Stage Residential Reverse Osmosis Water System 50 GPD
  • Load image into Gallery viewer, Four Stage Residential Reverse Osmosis Water System 50 GPD

Four Stage Residential Reverse Osmosis Water System 50 GPD

Regular price
$229.95
Sale price
$229.95
Regular price
Sold out
Unit price
per 

Four Stage Residential Reverse Osmosis System (50 GPD) features double o-ring housings and a clear pre-filter housing for quick inspection of the sediment filter, system utilizes 3/8" compression fittings, includes membrane separation, activated carbon absorption and conventional filtration to reduce the entire spectrum of contaminants that can be found in water.

RO systems substantially remove heavy metals, such as barium, cadmium, chromium, lead and mercury; radium 226/228 selenium, cysts, chlorine, salts, turbidity and more!

    Reduce a broad spectrum of contaminants using 4-stages of treatment, 50 GPD Thin Film Composite Membrane.

    STAGE 1 - 5 micron sediment prefiltration for mechanical reduction of rust and particulate, and provides membrane protection

    STAGE 2 - Activated carbon block prefiltration for reduction of tastes, odors, chlorine, & organic impurities

    STAGE 3 - Thin film composite reverse osmosis membrane for reduction of dissolved solids, including the range of toxic heavy metals, plus Giardia & Cryptosporidium cysts

    STAGE 4 - Activated in line carbon postfiltration for final polishing of off-tastes & odors

  • Thin film composite membrane 50 gpd.
  • NSF listed (3.2 gals) metal storage tank, rated for pressures to 100 psi; non-corrosive construction.
  • High quality filters for superior performance. (5 micron spun, solid block carbon & carbon post filter).
  • Chrome, long-reach, lead-free faucet. (Meets CA req.).
  • Wrench for convenient filter housing removal.

Maintenance & Warranty:
Pre and post filters recommended change every six months for regular usage, or once a year in light usage.
RO membrane:

Change recommended based on periodic TDS rejection tests. Typical is every two years.

Warranty:

Components are warranted for 1 year from date of purchase, excluding membrane, pre & post filters.

System comes with complete installation instructions and installation diagram.

Optional: Replacement filter set (change every 6 months) includes: sediment filter, carbon prefilter, carbon post filter Only $35.00 Select on top.
Optional: Monitor membrane performance with a hand held TDS meter Save $3.00 when purchased with system Reg. $37.95 Now Only $34.95, Select meter on top.
Replacement Membrane 50 GPD (every 2 years) $61.19

System dimensions: Main unit 18"H X 16"W X 6"D, Storage tank 11" dia. X 15" tall

TDS rejection: 94%+

Operating pressure range: 40-100 psi

Operating temperature range: 40° - 100° F

Water conditions: 2000 ppm TDS max. 400 ppm hardness max. ph 4 to 11. (known foulants such as manganese, iron, or hydrogen sulfide should be removed by pretreatment prior to the RO system).
Note: Reverse Osmosis Systems typically wastes 4 to 5 gallons of water for every gallon it produces.

Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.


Provides superior quality water for less cost than bottled water.

Automatic shut-off valve conserves water.

Thin-film membrane provides maximum production and rejection of dissolved salts, metals, & minerals.

All components and accessories are included for quick and easy installation.